C P - 3 4 0 CONNER NO MORE PRODUCED Native| Translation ------+-----+-----+----- Form 3.5"/HH Cylinders 788| | | Capacity form/unform 42/ MB Heads 4| | | Seek time / track 29.0/10.0 ms Sector/track 26| | | Controller SCSI1 SINGLE-ENDED Precompensation Cache/Buffer 1 KB Landing Zone Data transfer rate 1.000 MB/S int Bytes/Sector 512 MB/S ext Recording method RLL 2/7 operating | non-operating -------------+-------------- Supply voltage 5/12 V Temperature *C 5 55 | -40 60 Power: sleep W Humidity % 8 80 | 8 80 standby W Altitude km -0.061 3.048| 12.192 idle W Shock g 5 | 75 seek W Rotation RPM 3600 read/write W Acoustic dBA 40 spin-up W ECC Bit MTBF h 20000 Warranty Month Lift/Lock/Park YES Certificates ********************************************************************** L A Y O U T ********************************************************************** CONNER CP340 CUSTOMER OPTIONS +-------------------------------------------------------+ |+-+J1 **E1 ++ |XX || |HDA **E2 || |XX SCSI || | **E3 || |XX I || | **E4 ++ |XX N || | ++ |XX T J2 |+-+ TERMINATORS || |XX E | || |XX R | ++ |XX F | ++ |XX A | || |XX C | || |XX E | ++ |XX |1-+ |XX1 || | | || |J4 |XX Power J3 |+-+ |XX +-------------------------------------------------------+ 1 ********************************************************************** J U M P E R S ********************************************************************** CONNER CP340 CUSTOMER OPTIONS Jumper Setting ============== There are four jumpers available for configuration; three of the jumpers, E2, E3, and E4 are used to select the drive's SCSI ID, while E1 (installed) disables parity. E2/E3/E4 SCSI ID ---------------- +----------+-----------------------+ | SCSI ID | Jumpers | | | E4 | E3 | E2 | +----------+-------+-------+-------+ | 0 | OPEN | OPEN | OPEN | | 1 | OPEN | OPEN | CLOSED| | 2 | OPEN | CLOSED| OPEN | | 3 | OPEN | CLOSED| CLOSED| | 4 | CLOSED| OPEN | OPEN | | 5 | CLOSED| OPEN | CLOSED| | 6 | CLOSED| CLOSED| OPEN | | 7 | CLOSED| CLOSED| CLOSED| +----------+-------+-------+-------+ J4 Factory Test --------------- SIGNAL PIN NO. +5V 1 LED/SYNC 2 UNUSED 3-14 ********************************************************************** I N S T A L L ********************************************************************** CONNER CP340 CUSTOMER OPTIONS Mounting Holes -------------- Side: 6-32 UNC-2B .12 Max. Insertion Bottom: 6-32 UNC-2B .25 Max. Insertion J3 DC Power and pin connector assignments ------------------------------------------- +----------------------- | +------------+ +---- pin 1 +12V | | 1 2 3 4 | | 1 pin 2 GND | +------------+ +-- pin 3 GND +------------------ pin 4 +5V