C P - 2 2 5 0 CONNER NO MORE PRODUCED Native| Translation ------+-----+-----+----- Form 3.5"/HH Cylinders 1339| | | Capacity form/unform 240/ MB Heads 6| | | Seek time / track / ms Sector/track | | | Controller SCSI1 SINGLE-ENDED Precompensation Cache/Buffer KB Landing Zone Data transfer rate MB/S int Bytes/Sector 512 MB/S ext Recording method RLL operating | non-operating -------------+-------------- Supply voltage Temperature *C | Power: sleep W Humidity % | standby W Altitude km | idle W Shock g | seek W Rotation RPM read/write W Acoustic dBA spin-up W ECC Bit MTBF h Warranty Month Lift/Lock/Park YES Certificates ********************************************************************** J U M P E R S ********************************************************************** CONNER QUICK INSTALLATION GUIDE L-511-1008 11/93 SCSI QUICK INSTALLATION GUIDE ======================== SCSI Chart AA +----+----+----+-----+ | ID |E-1 |E-3 | E-4 | +----+----+----+-----+ | 0 |OUT |OUT |OUT | +----+----+----+-----+ | 1 |IN |OUT |OUT | +----+----+----+-----+ | 2 |OUT |IN |OUT | +----+----+----+-----+ | 3 |IN |IN |OUT | +----+----+----+-----+ | 4 |OUT |OUT |IN | +----+----+----+-----+ | 5 |IN |OUT |IN | +----+----+----+-----+ | 6 |OUT |IN |IN | +----+----+----+-----+ | 7 |IN |IN |IN | +----+----+----+-----+ Partity is always enabled with the following exceptions: CP3180: Jumper E4 to disable CP3100: Jumper E4 to disable CFP1060: Jumper E7 to disable LED Configuration Table ----------------------- Letter Connector LED+ LED- A J-4 Pin 1 Pin 2 B J-1 Pin 3 Pin 4 C J-5 Pin 3 Pin 4 D J-3 Pin 3 Pin 4 E J-7 Pin 1 Pin 2 F J-5 Pin 7 Pin 8